Electronics Weekly (blog) Crowdfunding Watch: Hybrid tube DAC/Amp add-on for the Raspberry Pi Electronics Weekly (blog) It works with a Raspberry Pi 2 or 3, using the standard 40-Pin GPIO/I2S interface and TI PCM5102A 24-Bit, 192Khz DAC. Note that the 502HTA supersedes the 503HTA we covered back in APril 2016. Check out the RaspTouch, too, if you are interested in this …
Continue reading here:
Crowdfunding Watch: Hybrid tube DAC/Amp add-on for the Raspberry Pi – Electronics Weekly (blog)
Granddad, there's a tube on my Raspberry Pi Elektor (blog) I knew it had to happen some day: the Raspberry Pi goes back in time by the addition of a vacuum tube. Pi2Media (a division of Pi2Design) have pulled it off, but with a twist.
Continued here:
Granddad, there’s a tube on my Raspberry Pi – Elektor (blog)
Raspberry Pi gets its audio tube amp Hat on Electronics Weekly (blog) Pi 2 Design is excited to introduce the first Tube Amp specifically designed for any of the 40-pin versions of the Raspberry Pi SBC Family. The 503HTA Hybrid Tube Amp HAT, designed and manufactured by Pi2Media (a division of PI 2 Design), is a High ..
See the original post:
Raspberry Pi gets its audio tube amp Hat on – Electronics Weekly (blog)
Raspberry Pi gets its audio tube amp Hat on Electronics Weekly (blog) Pi 2 Design is excited to introduce the first Tube Amp specifically designed for any of the 40-pin versions of the Raspberry Pi SBC Family. The 503HTA Hybrid Tube Amp HAT, designed and manufactured by Pi2Media (a division of PI 2 Design), is a High …
Visit link:
Raspberry Pi gets its audio tube amp Hat on – Electronics Weekly (blog)
Liliputing Clearly your Raspberry Pi needs a tube amp (crowdfunding) Liliputing The Raspberry Pi line of devices are inexpensive, low-power, credit card-sized computers. But while there are USB ports for connecting a keyboard, mouse, gamepad, or other accessories, there are also a series of GPIO (General Purpose Input/Output) pins … Raspberry Pi Hybrid Tube Amp HAT Launches From $99 (video) Geeky Gadgets all 2 news articles »
Original post:
Clearly your Raspberry Pi needs a tube amp (crowdfunding) – Liliputing
Geeky Gadgets Raspberry Pi Hybrid Tube Amp HAT Launches From $99 (video) Geeky Gadgets The 503HTA Raspberry Pi amp supports both 12AU7( ECC82) or 6922/6DJ8 (ECC88) type tubes and is equipped with a 3.5mm Jack plus selectable output resistance between 1.5, 32 and 100 ohms. The creators of the Raspberry Pi 503HTA Hybrid Tube ..
More:
Raspberry Pi Hybrid Tube Amp HAT Launches From $99 (video) – Geeky Gadgets
Electronics Weekly (blog) Raspberry Pi goes Hi-Fi with audio valve amp Electronics Weekly (blog) The 503HTA, Hybrid Tube AMP/DAC is a small Hat size raspberry pi add-on developed by Pi 2 Design. It connects to the PI I2S port and its Burr-Brown PCM5102A DAC drives a single 12AU7 tube gain stage with solid state Class-A output. It is designed to …
Follow this link:
Raspberry Pi goes Hi-Fi with audio valve amp – Electronics Weekly (blog)