Tag Archives: hardware-setup

Update This Classic Children’s Toy With a Raspberry Pi – Geek

Geek Update This Classic Children's Toy With a Raspberry Pi Geek Weilding a Raspberry Pi , a piece of wood, two motors, two shaft couplers, a handful of jumper cables, and, of course, an Etch A Sketch (purchased via Amazon for $15), Sunny got to work. While hardware setup is relatively easy, you'll need a knowledge …

Read more:
Update This Classic Children’s Toy With a Raspberry Pi – Geek

Share

Update This Classic Children’s Toy With a Raspberry Pi – Geek

Geek Update This Classic Children's Toy With a Raspberry Pi Geek Weilding a Raspberry Pi , a piece of wood, two motors, two shaft couplers, a handful of jumper cables, and, of course, an Etch A Sketch (purchased via Amazon for $15), Sunny got to work.

View original post here:
Update This Classic Children’s Toy With a Raspberry Pi – Geek

Share

Generator Monitor Gives the Phone Company the Boot – Hackaday

Hackaday Generator Monitor Gives the Phone Company the Boot Hackaday The hardware setup is little more than connecting the communications lines from the generator's controller (in this case, a Generac Evolution controller) to the serial communications pins on a Raspberry Pi 3.

Read the rest here:
Generator Monitor Gives the Phone Company the Boot – Hackaday

Share